Skip to the content
Peabody Teach

Share

This page

Peabody is free and has no ads. Sharing it is the best way to help.

Grade 7 scientific practices: Bridges, drones and big builds

A reading on the design process, strong shapes and fair testing, a paper bridge activity and three practice sheets, with a check and a key.

Grade 7 · 50 minutes · worksheet

Reading: bridges, drones and big builds

Name ______________ Date ____________

How can a bridge made of paper hold a heavy load? Engineers solve problems with a design process. First they state the problem. They list criteria, the things a good solution must do, and constraints, the limits on materials, cost and time. Then they brainstorm ideas, build a prototype, test it and improve it. A prototype is a first model used for testing.

Shape matters. A flat sheet of paper bends under almost no weight. Fold it into an accordion pattern or roll it into a tube and it holds much more, because the folds spread the weight out. The load is the weight that a structure carries. Triangles are strong because they do not change shape easily under a load. Many bridges use a truss, a frame built from triangles.

Testing shows the failure points, the places where a design bends or breaks first. A failure is not a waste. It tells the engineer what to fix. To compare designs fairly, change one thing at a time and keep the rest the same. Repeat each test several times. Drone designers use the same steps. They need parts that are strong and light, because a heavy drone needs more battery power.

WordMeaning
criteriaWhat a good solution must do
constraintA limit on materials, cost or time
prototypeA first model used for testing
loadThe weight a structure carries
trussA frame built from triangles
failure pointWhere a design bends or breaks first

Activity: the paper bridge

Materials: three sheets of paper, two stacks of books set 20 cm apart, about 50 pennies, a pencil, a ruler. Steps: 1. Lay one flat sheet across the gap. 2. Add pennies one at a time in the middle. Stop when the paper sags to the table. 3. Record the pennies. 4. Fold a second sheet into an accordion, and test it the same way. 5. Roll a third sheet into a tube and test it. 6. Do three trials of each design.

StepWhat to doSafety
1-3Test the flat sheetKeep the load low to the table
4-5Test the folded and rolled sheetsAn adult is nearby
6Repeat each test three timesDo not lean over the bridge
EndCollect the penniesWash your hands when you finish
DesignTrial 1Trial 2Trial 3
Flat sheet
Accordion fold
Rolled tube

Which design held the most pennies? Where did each one fail first?

Practice 1: recall

Picture word: a truss looks like a row of triangles joined in a line, like a zigzag.

Draw a truss: a zigzag of triangles between two posts.

Choose the best answer.

  1. What is a prototype?a) A first model used for testingb) The final product on salec) A list of materials
  2. Criteria area) limits on time and costb) the things a good solution must doc) the pieces of a truss
  3. A constraint isa) a test resultb) a shape made of trianglesc) a limit on materials, cost or time
  4. A load isa) the weight a structure carriesb) the way a bridge looksc) the paper used to build
  5. A truss isa) a round tubeb) a frame built from trianglesc) a flat sheet
  6. Which shape keeps its form well under a load?a) A rectangle with loose jointsb) A flat sheetc) A triangle

Practice 2: apply

Choose the best answer.

  1. A flat sheet bends under 2 pennies. The same sheet folded holds 40. Why?a) The folds spread the weight and make it stifferb) Folding adds more paperc) Pennies weigh less on folded paper
  2. A team may use only three sheets of paper. This is aa) criterionb) constraintc) prototype
  3. The bridge must hold 30 pennies. This is aa) constraintb) failure pointc) criterion
  4. In a test, a bridge bends first in the middle. The middle is thea) failure pointb) trussc) load
  5. To compare two bridge designs fairly, you shoulda) change the paper and the designb) use the same paper and gap and change only the designc) test each one once
  6. A drone team picks a strong, light material over a strong, heavy one. Why?a) Light materials are always cheaperb) Heavy materials cannot be strongc) A heavy drone needs more battery power

Practice 3: explain and compare

Choose the best answer.

  1. Why is a failed test useful?a) It shows which part to fixb) It proves the project is overc) It makes the next test easier
  2. Why repeat each test three times?a) To use up more penniesb) Results vary a little, so repeats show the patternc) To make the bridge stronger
  3. Why does a rolled tube hold more than a flat sheet?a) It has more paperb) Tubes are lighter than flat sheetsc) Its shape spreads the weight instead of letting it bend
  4. Why do bridges use triangles in a truss?a) Triangles resist changing shape under a loadb) Triangles look nicec) Triangles use less paper than lines
  5. Bridge A held 12 pennies and bridge B held 30. Only the folds were different. What is the best conclusion?a) Bridge A is strongerb) The folded design held more in this testc) Folding made no difference
  6. Why build a prototype before the final design?a) Because prototypes must be finished productsb) To skip testingc) To find problems early and fix them cheaply

Check

True or false, then choose.

  1. The design process includes testing and improving.TrueFalse
  2. A failed test means the work was wasted.TrueFalse
  3. A load is the weight a structure carries.TrueFalse
  4. A fair test changes several things at once.TrueFalse
  5. Which is a constraint?a) The bridge should hold 20 penniesb) Only three sheets of paper may be usedc) The bridge should look tidy
  6. A truss is a frame built from triangles.TrueFalse
  7. After a test shows a failure point, what should the engineer do?

Made with Peabody Teach, free printables for teachers: teach.peabody.kids. No sign-in, no ads.

Teacher copy with the answer key

Leer esta página en español

Last checked 2026-11-15. Every answer in it was worked out a second time without the key. Something wrong? Tell us.