Reading: how a little push lifts a lot
Name ______________ Date ____________
A simple machine helps us do work with less effort. A lever is one kind. It is a stiff bar that turns on a point called the fulcrum. The thing you want to move is the load. The push you give is the effort. A seesaw is a lever.
If the fulcrum is close to the load, a small effort can lift a heavy load. You push down farther, but with less force. Other simple machines are the wheel and axle, the pulley, the inclined plane, the wedge and the screw. A ramp is an inclined plane. It lets you raise a heavy box in a long slow way.
Scientists use fair tests to check ideas. In a fair test you change only one thing. This is the variable. You keep everything else the same. You measure the result and repeat the test to be sure. Engineers also follow the design process. They ask a question, plan, build, test, and then improve. A test that fails still teaches them something.
| Word | Meaning |
|---|---|
| lever | a bar that turns on a point |
| fulcrum | the point a lever turns on |
| load | the thing you want to move |
| effort | the push you use to move a load |
| variable | the one thing you change in a test |
| fair test | a test that changes only one thing |
| design process | the steps to plan, build and improve |
Activity: test a ruler lever
Materials: a ruler, a pencil as the fulcrum, 10 coins as the load, a small paper cup, tape, more coins for the effort side, a pencil for notes.
Steps: 1. Tape the cup to one end of the ruler and put the 10 coins in it. 2. Set the ruler on the pencil with the fulcrum at the middle. 3. Add coins to the other end until the load lifts. Count them. 4. Slide the fulcrum closer to the load and test again. 5. Repeat for each fulcrum spot. Change only the fulcrum spot.
| Step | What to do | Safety |
|---|---|---|
| Build | Tape the cup to the ruler | An adult is nearby |
| Test | Add coins to lift the load | Keep coins out of mouths |
| Move | Slide the fulcrum each time | Keep fingers clear |
| Clean up | Put everything away | Wash hands |
| Fulcrum spot | Coins to lift |
|---|---|
| Middle | |
| Closer to the load | |
| Very close to the load |
Sheet 1: recall
Look at the picture words in capital letters.
Circle the best answer
- Look at the picture word: SEESAW. What simple machine is it?a) A pulleyb) A leverc) A wedge Answer: A lever
- Look at the picture word: RAMP. What simple machine is it?a) A screwb) A leverc) An inclined plane Answer: An inclined plane
- Look at the picture word: FLAGPOLE ROPE. What simple machine lifts a flag?a) A pulleyb) A wedgec) A ramp Answer: A pulley
- What is the point a lever turns on?a) The loadb) The effortc) The fulcrum Answer: The fulcrum
- What is the push you give a lever?a) The effortb) The loadc) The variable Answer: The effort
- What is the thing you move with a lever?a) The effortb) The loadc) The fulcrum Answer: The load
Draw a lever. Label the fulcrum, the load and the effort.
Sheet 2: apply it
Circle the best answer
- You want a lever to lift a heavy rock with less effort. Where should the fulcrum be?a) Close to the rockb) Far from the rockc) It does not matter Answer: Close to the rock
- In a test of ramps, you change the ramp's height. What must stay the same?a) The heightb) The box you pushc) Nothing Answer: The box you push
- You test a lever and get 6 coins, then 4 coins, then 3 coins. What did the fulcrum do?a) Moved away from the loadb) Stayed the samec) Moved closer to the load Answer: Moved closer to the load
- An engineer's first build did not work. What is the best next step?a) Give upb) Improve the design and test againc) Hide it Answer: Improve the design and test again
- Which is the variable in the ruler lever test?a) The number of coins in the loadb) The rulerc) The fulcrum spot Answer: The fulcrum spot
- You repeat a test three times. Why?a) To check the result is not a flukeb) To make it harderc) To use more coins Answer: To check the result is not a fluke
Sheet 3: explain and compare
Circle the best answer
- How can a little push lift something heavy?a) The load becomes lighterb) A lever can trade a longer push for a smaller onec) The fulcrum pushes by itself Answer: A lever can trade a longer push for a smaller one
- Why is it a fair test to change only one thing?a) It is fasterb) It uses fewer coinsc) Then you know what caused the result Answer: Then you know what caused the result
- How is a pulley different from a ramp?a) A pulley changes the direction of a pull; a ramp spreads the lift over a slopeb) They are the samec) A ramp has a rope Answer: A pulley changes the direction of a pull; a ramp spreads the lift over a slope
- Test A changes the ramp's height and the box. Test B changes only the height. Which is fair?a) Test Ab) Neitherc) Test B Answer: Test B
- Why do engineers test a design?a) To find what to improveb) To prove it is perfectc) To use up time Answer: To find what to improve
- What does a longer push on a lever buy you?a) A bigger loadb) A smaller effortc) A new fulcrum Answer: A smaller effort
Check
True or false, then circle
- A seesaw is a lever.TrueFalse Answer: true
- In a fair test you change two things at once.TrueFalse Answer: false
- The fulcrum is the point a lever turns on.TrueFalse Answer: true
- A failed test teaches nothing.TrueFalse Answer: false
- Which is the first step of the design process?a) Ask a questionb) Buildc) Improve Answer: Ask a question
- A ramp is ana) axleb) inclined planec) fulcrum Answer: inclined plane
Write on the lines: Explain how moving the fulcrum changes how many coins you need to lift the load.