Skip to the content
Peabody Teach

Share

This page

Peabody is free and has no ads. Sharing it is the best way to help.

Grade 5 scientific practices: Levers, tests and better builds

Simple machines, fair tests and the design process for grade 5: a reading, a ruler lever test, three practice sheets and a check, with a key.

Grade 5 · 40 minutes · worksheet

Reading: how a little push lifts a lot

Name ______________ Date ____________

A simple machine helps us do work with less effort. A lever is one kind. It is a stiff bar that turns on a point called the fulcrum. The thing you want to move is the load. The push you give is the effort. A seesaw is a lever.

If the fulcrum is close to the load, a small effort can lift a heavy load. You push down farther, but with less force. Other simple machines are the wheel and axle, the pulley, the inclined plane, the wedge and the screw. A ramp is an inclined plane. It lets you raise a heavy box in a long slow way.

Scientists use fair tests to check ideas. In a fair test you change only one thing. This is the variable. You keep everything else the same. You measure the result and repeat the test to be sure. Engineers also follow the design process. They ask a question, plan, build, test, and then improve. A test that fails still teaches them something.

WordMeaning
levera bar that turns on a point
fulcrumthe point a lever turns on
loadthe thing you want to move
effortthe push you use to move a load
variablethe one thing you change in a test
fair testa test that changes only one thing
design processthe steps to plan, build and improve

Activity: test a ruler lever

Materials: a ruler, a pencil as the fulcrum, 10 coins as the load, a small paper cup, tape, more coins for the effort side, a pencil for notes.

Steps: 1. Tape the cup to one end of the ruler and put the 10 coins in it. 2. Set the ruler on the pencil with the fulcrum at the middle. 3. Add coins to the other end until the load lifts. Count them. 4. Slide the fulcrum closer to the load and test again. 5. Repeat for each fulcrum spot. Change only the fulcrum spot.

StepWhat to doSafety
BuildTape the cup to the rulerAn adult is nearby
TestAdd coins to lift the loadKeep coins out of mouths
MoveSlide the fulcrum each timeKeep fingers clear
Clean upPut everything awayWash hands
Fulcrum spotCoins to lift
Middle
Closer to the load
Very close to the load

Sheet 1: recall

Look at the picture words in capital letters.

Circle the best answer

  1. Look at the picture word: SEESAW. What simple machine is it?a) A pulleyb) A leverc) A wedge
  2. Look at the picture word: RAMP. What simple machine is it?a) A screwb) A leverc) An inclined plane
  3. Look at the picture word: FLAGPOLE ROPE. What simple machine lifts a flag?a) A pulleyb) A wedgec) A ramp
  4. What is the point a lever turns on?a) The loadb) The effortc) The fulcrum
  5. What is the push you give a lever?a) The effortb) The loadc) The variable
  6. What is the thing you move with a lever?a) The effortb) The loadc) The fulcrum

Draw a lever. Label the fulcrum, the load and the effort.

Sheet 2: apply it

Circle the best answer

  1. You want a lever to lift a heavy rock with less effort. Where should the fulcrum be?a) Close to the rockb) Far from the rockc) It does not matter
  2. In a test of ramps, you change the ramp's height. What must stay the same?a) The heightb) The box you pushc) Nothing
  3. You test a lever and get 6 coins, then 4 coins, then 3 coins. What did the fulcrum do?a) Moved away from the loadb) Stayed the samec) Moved closer to the load
  4. An engineer's first build did not work. What is the best next step?a) Give upb) Improve the design and test againc) Hide it
  5. Which is the variable in the ruler lever test?a) The number of coins in the loadb) The rulerc) The fulcrum spot
  6. You repeat a test three times. Why?a) To check the result is not a flukeb) To make it harderc) To use more coins

Sheet 3: explain and compare

Circle the best answer

  1. How can a little push lift something heavy?a) The load becomes lighterb) A lever can trade a longer push for a smaller onec) The fulcrum pushes by itself
  2. Why is it a fair test to change only one thing?a) It is fasterb) It uses fewer coinsc) Then you know what caused the result
  3. How is a pulley different from a ramp?a) A pulley changes the direction of a pull; a ramp spreads the lift over a slopeb) They are the samec) A ramp has a rope
  4. Test A changes the ramp's height and the box. Test B changes only the height. Which is fair?a) Test Ab) Neitherc) Test B
  5. Why do engineers test a design?a) To find what to improveb) To prove it is perfectc) To use up time
  6. What does a longer push on a lever buy you?a) A bigger loadb) A smaller effortc) A new fulcrum

Check

True or false, then circle

  1. A seesaw is a lever.TrueFalse
  2. In a fair test you change two things at once.TrueFalse
  3. The fulcrum is the point a lever turns on.TrueFalse
  4. A failed test teaches nothing.TrueFalse
  5. Which is the first step of the design process?a) Ask a questionb) Buildc) Improve
  6. A ramp is ana) axleb) inclined planec) fulcrum

Write on the lines: Explain how moving the fulcrum changes how many coins you need to lift the load.

Made with Peabody Teach, free printables for teachers: teach.peabody.kids. No sign-in, no ads.

Teacher copy with the answer key

Leer esta página en español

Last checked 2026-11-15. Every answer in it was worked out a second time without the key. Something wrong? Tell us.