Skip to the content
Peabody Teach

Share

This page

Peabody is free and has no ads. Sharing it is the best way to help.

Science enrichment: engineering challenges

Engineering challenges for grades 3 to 6. Design, build and improve a paper bridge and a foil boat with home materials. Three tiers with a key.

Grades 3 to 6 · 40 minutes · worksheet

Think like an engineer

Name ______________ Date ____________

Engineers find a problem, design a fix, build a model, test it and improve it. A model is called a prototype. A goal says what the design must do. A limit is called a constraint.

Warm-up: design steps

  1. An engineer's first try does not work well. What should the engineer do next?a) Say it is perfectb) Change one part and test againc) Stop forever
  2. A goal like "must hold 10 pennies" tells you what the design must do.TrueFalse
  3. Which material is best for a small boat that must keep water out?a) A paper napkinb) A sheet of aluminum foilc) A sheet of newspaper
  4. What do we call a first test model of a design?

The paper bridge

A student builds a bridge from one sheet of paper. It spans a 20 cm gap between two books. A flat sheet holds 6 pennies and then folds.

Stretch: improve the bridge

  1. Which change would most likely make the bridge stronger?a) Cut it into thin stripsb) Fold the paper into pleatsc) Keep it a flat sheet
  2. Changing three parts at once makes it easy to know which change helped.TrueFalse
  3. The pleated bridge holds 15 pennies. The flat bridge held 6. How many more pennies does it hold?
  4. What do we call a limit, such as "use only one sheet of paper"?
TryWhat I changedPennies held
1
2
3

The foil boat

A student shapes foil into three boats. Each boat floats in a bowl of water while pennies are added one at a time. The table shows how many pennies each held before sinking.

ShapeTry 1Try 2Try 3
Flat567
Box171918
Wide box242730

Reach: average and explain

  1. What is the average for the flat boat, in pennies?
  2. What is the average for the box boat, in pennies?
  3. What is the average for the wide box boat, in pennies?
  4. The box boat held how many times as many pennies as the flat boat, on average?
  5. Why can a wide box hold more pennies than a flat sheet?a) It pushes aside more water, so the water pushes up moreb) Foil gets heavier in waterc) Pennies get lighter on foil
  6. Testing each shape three times gives more trustworthy results than testing once.TrueFalse

Your own challenge

Pick a problem: a stronger bridge, a tower that stands, or a boat that holds more. Write what it must do and its limit. Use blunt scissors. Ask a grown-up for any hot or sharp tools.

Part of my planMy notes
The problem
It must do
The limit
Materials
What I will change after test 1

Draw your design. Label the parts.

Made with Peabody Teach, free printables for teachers: teach.peabody.kids. No sign-in, no ads.

Teacher copy with the answer key

Last checked 2026-11-15. Every answer in it was worked out a second time without the key. Something wrong? Tell us.