Skip to the content
Peabody Teach

Share

This page

Peabody is free and has no ads. Sharing it is the best way to help.

Grade 6 scientific practices: Bridges, drones and big builds: teacher copy

For the teacher

Common mix-ups: children think a design is either good or bad, and that more material always makes it stronger. Designs trade one thing for another, and shape can matter more than amount. To support, give a ready folded pleat to copy. To stretch, ask children to add a second constraint and redesign. Plan about 45 minutes.

Reading: bridges, drones and big builds

Name ______________ Date ____________

Engineers solve problems by designing things. Before they build, they list the criteria. Criteria are what the design must do. A bridge must reach across a gap and carry a load. Engineers also list the constraints. Constraints are the limits, such as cost, time, size and materials.

Designs involve trade-offs. A drone is an aircraft with no pilot aboard. It must be light enough to fly, yet strong enough to survive a bump. Adding strong parts adds weight. Engineers weigh one need against another. A load can push on a part, called compression, or pull on it, called tension.

Shape matters. A flat sheet of paper laid across a gap bends under a small load. If you fold the paper into pleats or a tube, it is much stiffer. Triangles are strong shapes, so many bridges use them. Engineers build a prototype, test it, find the weak spot and improve it. They test with a measure, such as how many weights it holds before it bends.

WordMeaning
criteriawhat a design must do
constraintsthe limits on a design
trade-offgiving up one thing to gain another
loadthe weight a structure carries
compressiona push that squeezes a part
tensiona pull that stretches a part
prototypea first model to test

Activity: test a paper bridge

Materials: 2 sheets of paper, 2 stacks of books, a ruler, tape, scissors, a small paper cup, coins, a pencil.

Constraints: one sheet per bridge, no more than 4 pieces of tape, a gap of 15 cm. Steps: 1. Set two stacks of books 15 cm apart. 2. Lay a flat sheet across the gap. 3. Set the cup on the middle and add coins one at a time. Count until it bends down to the table. 4. Fold the second sheet into pleats, like a fan. Lay it across the gap. 5. Test again and count the coins.

StepWhat to doSafety
Set upMake steady book stacksAn adult is nearby
CutTrim paper with scissorsCut away from your hand
LoadAdd coins one at a timeKeep feet clear of falling books
Clean upPut everything awayWash hands
DesignCoins held
Flat sheet
Pleated sheet
My own improved design

Sheet 1: recall

Look at the picture words in capital letters.

Circle the best answer

  1. Look at the picture word: BRIDGE. What must a bridge's criteria include?a) Be painted blueb) Reach across a gap and carry a loadc) Fly Answer: Reach across a gap and carry a load
  2. Look at the picture word: COST. Cost is an example of aa) criterionb) tensionc) constraint Answer: constraint
  3. Look at the picture word: TRIANGLE. Why do engineers use triangles?a) They are strong shapesb) They are cheap shapesc) They are round Answer: They are strong shapes
  4. What is a prototype?a) A final productb) A rulec) A first model to test Answer: A first model to test
  5. What is a load?a) The weight a structure carriesb) A kind of paperc) A test score Answer: The weight a structure carries
  6. A pull that stretches a part isa) compressionb) tensionc) gravity Answer: tension

Draw a bridge with a triangle shape. Label where the load sits.

Sheet 2: apply it

Circle the best answer

  1. A design must be done in one week. What is this?a) A constraintb) A criterionc) A load Answer: A constraint
  2. A design must carry 10 coins. What is this?a) A constraintb) A criterionc) A test Answer: A criterion
  3. A paper bridge folds into pleats. What does this change?a) It makes the bridge flatterb) Nothingc) It makes the bridge stiffer Answer: It makes the bridge stiffer
  4. A test shows the bridge bends in the middle. What is the best next step?a) Stop all testsb) Strengthen the middle and test againc) Paint it Answer: Strengthen the middle and test again
  5. A drone has a heavy battery. What trade-off must engineers weigh?a) Color against costb) Nothingc) Longer flight against more weight Answer: Longer flight against more weight
  6. The load pushes down on the top of a beam. This squeezes it. What is this?a) Compressionb) Tensionc) Gravity Answer: Compression

Sheet 3: explain and compare

Circle the best answer

  1. How can a bridge made of paper hold a heavy load?a) Using flat paperb) Folding the paper makes it stifferc) Adding paint Answer: Folding the paper makes it stiffer
  2. How are criteria and constraints different?a) They are the sameb) Constraints are what it must doc) Criteria are what it must do; constraints are its limits Answer: Criteria are what it must do; constraints are its limits
  3. Why do engineers test and improve a prototype?a) To find weak spotsb) To show it is perfectc) To use time Answer: To find weak spots
  4. Why can a design with more material be weaker?a) More material is always strongerb) Materials do not matterc) The shape may matter more than the amount Answer: The shape may matter more than the amount
  5. Bridge A holds 12 coins. Bridge B holds 20. Which is stronger in this test?a) Bb) Ac) They are equal Answer: B
  6. Why use a measure like coins held?a) It makes a bridge prettyb) It gives a number to compare designsc) It is a rule Answer: It gives a number to compare designs

Check

True or false, then circle

  1. Constraints are limits on a design.TrueFalse Answer: true
  2. A flat sheet of paper is stiffer than a pleated one.TrueFalse Answer: false
  3. A prototype is a first model to test.TrueFalse Answer: true
  4. Adding parts to a drone can add weight.TrueFalse Answer: true
  5. What is the best way to improve a design?a) Test, find the weak spot and fix itb) Skip testsc) Guess Answer: Test, find the weak spot and fix it
  6. Criteria area) the paper usedb) what a design must doc) a kind of tape Answer: what a design must do

Write on the lines: Describe how a paper bridge could hold a heavy load. Name one criterion and one constraint.