Skip to the content
Peabody Teach

Share

This page

Peabody is free and has no ads. Sharing it is the best way to help.

Grade 4 scientific practices: Levers, tests and better builds: teacher copy

For the teacher

Common misunderstandings: a machine does not make work vanish, since a smaller force acts over a longer distance. Students also change several things and call it fair. To support, build the ramp together and let students release the car. To stretch, ask them to name a second variable they could test and how to control the rest. Roll each car three times. Plan about 50 minutes.

Reading: machines and better designs

Name ______________ Date ____________

A simple machine is a tool with few moving parts that helps us do work. It can change the size of a force or its direction. It cannot give you something for nothing. When a machine lowers the force you need, you must move through a longer distance.

A lever turns on a fulcrum. A ramp is a slanted surface. Pushing a box up a ramp takes less force than lifting it straight up, but the box travels farther. A pulley is a wheel with a rope. It can change the direction of a pull, so you pull down to lift a load up. A wheel and axle turns easily. A doorknob is a wheel and axle.

Engineers solve problems with the design process. They define the problem. They think of many ideas. They plan and build a model. Then they test it and improve it. Each test must be fair. Engineers change one variable and keep the rest the same. They repeat the test more than once to be sure of the result.

WordMeaning
simple machinea tool that helps us do work
forcea push or a pull
rampa slanted surface
pulleya wheel with a rope
variablethe one thing you change
modela small test version of a design

Hands-on: does a taller ramp roll farther?

Materials: a board or stiff cardboard, books, a toy car, a ruler or tape measure and a pencil. The variable is the height of the ramp. Keep the board, the car and the release the same.

StepWhat to doSafety
1. BuildProp one end of the board on 1 book.An adult is nearby.
2. MarkMark a start line near the top.Keep books in a flat stack.
3. RollLet the car go. Do not push it.Keep feet clear of the path.
4. MeasureMeasure how far it rolled past the ramp.Pick up the car right away.
5. RepeatRoll 3 times. Then use 2 books, then 3.Keep the floor clear.
6. Clean upPut things away. Wash your hands.Wash hands with soap.
BooksTrial 1Trial 2Trial 3Average
1 book________
2 books________
3 books________

Practice 1: what is it?

Sheet 1: pick the best answer.

  1. What does a simple machine help us do?a) Make work disappearb) Do work more easilyc) Make energy from nothing Answer: Do work more easily
  2. Look at the picture word: ramp. What is a ramp?a) A slanted surfaceb) A wheel with a ropec) A turning bar Answer: A slanted surface
  3. Look at the picture word: pulley. What is a pulley?a) A turning barb) A slanted surfacec) A wheel with a rope Answer: A wheel with a rope
  4. Look at the picture word: variable. A variable is the one thing you do what to?a) Keepb) Changec) Break Answer: Change
  5. Which is the first step of the design process?a) Define the problemb) Test the modelc) Improve the model Answer: Define the problem
  6. Look at the picture word: doorknob. A doorknob is a kind of what?a) Rampb) Pulleyc) Wheel and axle Answer: Wheel and axle

Practice 2: use what you know

Sheet 2: pick the best answer.

  1. A worker slides a box up a ramp instead of lifting it. What is true?a) The force is smaller and the path is longerb) The force is larger and the path is shorterc) The box weighs less Answer: The force is smaller and the path is longer
  2. A student wants to lift a load by pulling down on a rope. Which machine fits?a) A rampb) A pulleyc) A lever with no fulcrum Answer: A pulley
  3. A class tests ramp height. Which must stay the same?a) The ramp heightb) The distance the car rollsc) The car and the board Answer: The car and the board
  4. A student rolls the car one time and says the test is done. What is a better plan?a) Roll it three timesb) Roll it once more only if it is slowc) Change the car each time Answer: Roll it three times
  5. A model bridge fails the test. What is the best next step?a) Throw it out and stopb) Find the weak part and improve itc) Say it passed Answer: Find the weak part and improve it
  6. A test changes the ramp height and the car at the same time. What is the problem?a) Too many variablesb) Too few booksc) The ramp is too flat Answer: Too many variables

Practice 3: explain and compare

Sheet 3: pick the best answer.

  1. Why does a ramp make lifting easier?a) It makes the box lighterb) It uses a smaller force over a longer pathc) It removes friction Answer: It uses a smaller force over a longer path
  2. How are a ramp and a lever alike?a) Both turn on a fulcrumb) Both use a ropec) Both can lower the force you need Answer: Both can lower the force you need
  3. Why do engineers repeat a test?a) To be sure of the resultb) To use more timec) To change the variable Answer: To be sure of the result
  4. How is a pulley different from a ramp?a) A pulley can change the direction of a pullb) A pulley is a slanted surfacec) A pulley has no force Answer: A pulley can change the direction of a pull
  5. Why build a model first?a) A model is always the final designb) It lets you test ideas before you build the real onec) Models cost a lot Answer: It lets you test ideas before you build the real one
  6. A taller ramp gets a faster car. Which claim fits the data?a) Ramp height has no effectb) Cars like short rampsc) A taller ramp made the car roll farther Answer: A taller ramp made the car roll farther

Check: show what you learned

Check: answer each one.

  1. A machine can give you work for free.TrueFalse Answer: false
  2. A fair test changes one variable.TrueFalse Answer: true
  3. Which machine is a wheel with a rope?a) Pulleyb) Rampc) Lever Answer: Pulley
  4. Engineers test a model and then improve it.TrueFalse Answer: true
  5. What do you do to the result of a test?a) Hide itb) Record itc) Skip it Answer: Record it
  6. A ramp lowers the force you need. What do you give up?a) Nothingb) Weightc) A longer path Answer: A longer path

Write: tell the steps of the design process in order.